在手提袋的印刷中，很多人不注意水墨的類型，在印刷的過程中也沒有很好的控制，這樣在印刷的質量上就可能會出現一系列的問題。那么為了避免這樣的問題出現，我們主要應該做好哪些工作呢？下面就讓我們跟隨著濟南手提袋廠一起來學習一下。

In the printing of handbags, many people do not pay attention to the type of ink and wash, and there is no good control in the printing process, so there may be a series of problems in the printing quality. What should we do to avoid such problems? Now let's follow Jinan handbag factory to learn.

手提袋使用的是水墨進行印刷的，這樣的話就不能把手提袋放在有溶劑型的油墨附近，更不能把溶劑型的有機溶劑和印刷手提袋的水墨放在一起，這樣可能會讓印刷的手提袋出現問題。聽了上面的介紹，相信大家已經明白了，水墨在手提袋的印刷中起著關鍵的作用。所以應該學會用正確的方法保存水墨。

The handbag is printed with ink. In this way, the handbag cannot be placed near the solvent based ink, nor can the solvent based organic solvent be placed together with the ink of the printing handbag. This may cause problems with the printed handbag. After listening to the above introduction, I believe you have understood that ink plays a key role in the printing of handbags. Therefore, we should learn to use the correct method to save ink.

在溫度上應該嚴格控制，應該把水墨放在室內，而且溫度應該保持在20度上下。其次，在使用水墨的時候，應該使用專業的工具把水墨均勻的攪拌開來，這樣才能保證印刷質量。然后，在印刷手提袋的過程中，還應該重視的是PH值和粘度的問題。當粘度出現變化時，可以通過水來稀釋，或者通過增加水墨來變稠。當PH變化的時候，也應該通過專門的原料來調整。

The temperature should be strictly controlled, and the ink should be placed indoors, and the temperature should be kept at about 20 degrees. Secondly, when using ink, professional tools should be used to stir the ink evenly to ensure the printing quality. Then, in the process of printing handbags, we should also pay attention to the PH value and viscosity. When the viscosity changes, it can be diluted by water or thickened by adding ink. When PH changes, it should also be adjusted through special raw materials.

只要在印刷的過程中注意以上幾點問題，印刷的手提袋基本就沒有問題了。您對此有什么問題或者什么需求，就來我們網站http://www.096685.com進行咨詢吧！

As long as you pay attention to the above issues in the process of printing, there will be no problem with the printed handbag. If you have any questions or needs, please come to our website http://www.096685.com Consult!